Installation Manual

    1. To install the XBB system, you need the XBB Configurator app, which you can find on Google Play or App Store.
    2. Start the app and create an account.
    3. Then verify the account with the code sent to your email. (If you don't receive an email, check your spam folder).

    1. The XBB Dongle® is installed in the car's diagnostic port, also known as the OBD2 connector. The port is usually located in the driver’s footwell. Sometimes it may be hidden behind a panel that needs to be opened or removed to install the XBB Dongle®.

    2. Example of an OBD2 connector.

    3. Make sure to firmly press your XBB Dongle® into the socket.
    4. If you are using a Y-splitter or extension cable, ensure that the XBB Dongle® is securely installed and not hanging from the wiring. This is important for the built-in accelerometer to function correctly and detect the car's movements.
    5. The XBB Dongle® must be installed in the diagnostic port for the auxiliary light installation to work.

    1. Starta appen och klicka på ”Sök efter XBB-enhet”.
    2. Select the XBB Dongle® that appears to continue the installation.
    3. Follow the instructions for firmware update if recommended.
    4. If you are unable to reconnect to your XBB Dongle® after the update, try removing it from the car's OBD2 port and reinserting it.
    5. Note! The XBB Dongle® is only visible to the phone for 10 minutes after it receives power. If you need to reconnect, you must remove and reinsert it into the diagnostic port. To avoid doing this, you can pair the phone via the app: Main Menu → My Devices → Save Device to My List → Pair with Device."

    1. A recipe is a unique software developed for a specific car model and its equipment package, which can include model year, headlight model, facelift, transmission, software, and similar factors.
    2. If your XBB Dongle® is brand new, it will come pre-installed with a Q.C. recipe (Quality Control). This recipe is intended only for our internal quality tests conducted during production
    3. Börja med att klicka på settings och sedan ”Ta bort recept”.
    5. Klicka sedan på ”Byt recept”. Du kan byta recept obegränsat antal gånger.
    6. Select a recipe based on your car model. There are usually several to choose from, so start with the one that best matches your car, such as model year, headlights, and other relevant specifications.

    1. Kontrollera att de signaler och funktioner du är intresserad av fungerar i appen genom att testa dem i bilen. Till exempel, när du aktiverar helljuset ska ”HIGHBEAM” ändra status till ”PÅ” och markeras med grönt. Samma sak gäller för övriga signaler.
    2. Om du behöver prova ett annat recept, klicka på ”Settings” och välj ”Ta bort recept”. Välj sedan ”Byt recept”, hitta ett nytt recept och testa funktionerna igen.
    3. Note Important! Avsluta installationen av XBB Dongle® genom att stänga av bilen och låsa/larma den. Kontrollera sedan i appen att signalen ”SYSTEM_ACTIVE” visas. Om signalen finns med är det viktigt att, efter att du har låst/larmat bilen, se till att den räknar ner till 0 och blir rödmarkerad.
    4. Note! Do not remain in the car while performing this test. If the signal DOESN'T turn red, the recipe likely does not match your car, and there is a risk that the car's battery could drain. In that case, try another recipe.

  1. Have you found a working recipe for your car? If not, go back to Step 1 and try again.
  2. Mount your lighting and route the wiring to the location where you plan to install your XBB PowerUnit®.
  3. Note! Have you purchased a pre-made relay harness?
    Då är det extra viktigt att du kontrollerar att alla kablar i reläsockeln är rätt kopplade i förhållande till din XBB PowerUnit®. Tyvärr är många ”Kina”-kablage felkopplade och måste därför korrigeras innan XBB PowerUnit® ansluts. Vanligtvis är felet att jordanslutningen/minus är placerad fel.
  4. Remember to place your XBB PowerUnit® in an upright position and as protected as possible from heat and moisture.
  5. Note! If your lighting draws more than 15 Amps (180W), it cannot be connected directly to your XBB PowerUnit®. In that case, you will need to connect the lighting to a power relay, which is controlled by your XBB PowerUnit®.
  6. Wiring diagrams with different connections are available on our website. Link
  7. ALWAYS use a fuse and place it as close to the power source or battery as possible.
  8. Make sure to use the correct wire gauge to avoid using cables that are too undersized. Cables that are too thin can, in the worst case, result in a cable fire.
  9. Keep in mind that a standard cable terminal is designed to handle between 15 and 24 Amps, depending on the brand and wire gauge.
  10. We recommend using Standard Power Timer terminals in relay sockets and fuse holders.

Uninsulated cable terminal (Up to 24A)

Insulated cable terminal (Up to 24A)

Standard Power Timer (Up to 40A)

  1. You can install and connect up to 4 XBB PowerUnits® to one XBB Dongle®, or 3 XBB PowerUnits® and 1 XBB Smart Button.
  2. The XBB PowerUnit® can handle a maximum of 15 Amps (180W). If the lighting draws more than this, you must connect it via a power relay. Then let your XBB PowerUnit® control the relay coil.
  3. Note! Have you purchased a pre-made relay harness?
    Då är det extra viktigt att kontrollera att alla kablar i reläsockeln är rätt kopplade i förhållande till din XBB PowerUnit®. Tyvärr är många ”Kina”-kablage felkopplade och måste därför korrigeras innan XBB PowerUnit® ansluts. Vanligtvis sitter jordanslutningen/minus på fel plats.
  4. The XBB PowerUnit® should be mounted upright with the connectors facing downward and protected as much as possible from heat and moisture.
  5. Preferably mount the XBB PowerUnit® near the firewall to minimize the distance to the XBB Dongle®.

  1. For your lighting to work, your installed XBB PowerUnit® must be added to the app, and you also need to decide which functions you want it to perform.
  2. Open the XBB Configurator® app to begin the setup.
  3. If you haven’t paired your phone with your XBB Dongle® (Step 4:5), and more than 10 minutes have passed since you were last connected, you will need to remove it from the diagnostic port and reinsert it for the phone and app to connect.
  4. Gå in på fliken ”XBB PowerUnit®”, klicka på plustecknet och välj ”Lägg till XBB PowerUnit®”.
  5. Välj den XBB PowerUnit® som visas och klicka sedan på ”Inställningar” (kugghjulet).
    – If no device appears despite several attempts, it is likely that your XBB PowerUnit® is miswired. Check the wiring, fuse, and connections.
  6. When you are in the settings for the XBB PowerUnit®, there are two outputs where you need to select their function.
  7. Med funktionen ”Tvinga på” kan du testa om din belysning är korrekt inkopplad. Du kan göra detta utan att välja ett recept. Om allt är rätt kopplat, ska belysningen tändas när du aktiverar ”Tvinga på”.
  8. Du kan också använda ”Tvinga på”-funktionen för att kontrollera att du kopplat rätt belysning till rätt utgång.
  9. Output 1 (Out 1) can handle a MAX of 15 Amps (180W).
  10. Output 2 (Out 2) can handle a MAX of 5 Amps (60W).
  11. Om du vill att helljuset ska aktivera din belysning, välj signalen ”HIGHBEAM” på den utgång där du kopplat in belysningen. Klicka på ”Spara” när du gjort ditt val.
  12. Om du har köpt belysning med inbyggt positionsljus och vill använda det, är signalen ”IGNITION” (Tändning) oftast att föredra, om inte signalen ”POSITIONLIGHT” finns tillgänglig. Klicka på ”Spara” när du har gjort ditt val.
  13. Note! Be aware that the position light in your connected lighting may be illegal to use, depending on when and in combination with other lighting on the car it is active.

  1. Some car models and recipes require us to use the built-in accelerometer in the XBB Dongle® to determine if the car is started. This means that your XBB Dongle® is in sleep mode until it detects vibrations or movements in the car. Start or drive the car when testing the functions for the best results. You can also gently tap the dongle to wake it up.
  2. Keep in mind that some functions, such as automatic high beams, may not work if it's not dark enough outside.
  3. Perform a function test of the entire installation.
  4. Note Important! Glöm inte att kontrollera signalen ”SYSTEM_ACTIVE” i appen. Se Steg 6:3.

Take me to the FAQ.

Take me to the Wiring Examples.

Take me to the Main Page.

en_USEnglish
sv_SESvenska en_USEnglish